ProPure-K--Replace Parker High Flow Filter Cartridges

Features and Benefits:

• Higher flow rate. Under the same conditions, the flow rate of one 6-inch high flow filter cartridge is 10 to 15 times higher than standard 2.5-inch diameter depth filter cartridge

• Thermally bonded multi-layer of 100% polypropylene filter media and support material for wide chemical compatibility and filtration integrity

• Graded filtration pore sizes assure the high retention rate and long service life

• Multi-layer pleated construction for lower pressure drop, higher dirt-holding capacity and inner O-ring sealing assures filtration integrity

• Larger filtration area requires fewer filter elements to lower operation &maintenance cost and friendly handle design for easier change-out to reduce labor cost.

Material:

• Filter Medium: Polypropylene Depth Membrane

• Inner Core: Reinforced Polypropylene

• Outer Cage: Reinforced Polypropylene

• End caps: Reinforced Polypropylene

• O-rings: Silicon/ EPDM / NBR/ Viton

• Construction Method:   Welding (No adhesives)

Dimension:

• Outside Diameter: 6” (152 mm) 

• Inner Diameter: 3.5” (89 mm)

• Micron Rating: 1μm, 3μm, 5μm,10μm,20μm,30μm,50μm,70μm

• Length: 20”(508mm), 40” (1016 mm), 60” (1524mm) 

Recommended operation condition:

• Maximum Temperature: 82℃  

• Maximum Pressure:     3.4 bar (50psi) @ 82℃

• Recommended Change-out Differential Pressure: 2.1bar @20℃ 

Typical Application:

• RO pre-filtration

• Municipal water

• Boiler Condensate

• Coolants

• Process water (Food & Beverage, Electronics, Pharmaceuticals)